Page 36 - Tubular Specialties Manufacturing, Inc. - Catalog 825

F or correctional, psychiatric, school, park and service stations, TSM recommends
Security AcceSSorieS
security accessories. Satin and glass-blasted finishes provide easy maintenance.
Security Mirrors Units have continuous welding for tamper-resistance.

M-032-R Framed Security Mirror Not Shown:
Rear Mounting M-032-F
Frame is satin finish type 304 14 gauge (2.1mm) stainless steel with Framed Mirror
corners welded and ground smooth. Unit has fiberboard backing
and 6 “T” nuts welded on back for rear mounting. Specify if wall Front Mounting
thickness is greater than 6" (50 mm). Frame is satin finish type 304 14 gauge (2.1mm)
5
Overall Size: 12" x 16" x /8" (305 x 405 x 16 mm) stainless steel with corners welded and ground
1
smooth. Unit has TORX vandal-resistant /4"-20
Glazing Options: x 2" (50 mm) machine screws for front mounting.
M-032-R-B - Very good reflective quality. Type 304 20 gauge Overall Size: 12" x 16" x /8" (305 x 405 x 16 mm)
5
(.9mm) stainless steel, #8 polished finish.
M-032-R-BA - Good reflective quality. Type 430 stainless steel, Glazing Options:
bright annealed finish. M-032-R-B Shown M-032-F-B - Very good reflective quality.
Type 304 20 gauge (.9 mm)
stainless steel, #8 polished
M-30-F finish.
Integral Frame Mirror M-032-F-BA - Good reflective quality.
with Rounded Corners Type 430 stainless steel,
Front Mounting bright annealed finish.
One piece #8 mirror polish finish type 304 18 gauge (1.2 mm)
formed stainless steel. Unit is one-piece construction with rounded
corners and six mounting holes.
1
Overall Size: 12" x 16" x /4" (305 x 405 x 6 mm)
Not Shown:
M-30-R - Rear mounting; unit has 6 “T” nuts welded on back.
M-30-F Shown

Recessed Soap Dish Security Toilet Paper Holders

828-D 869-A 864 865-P
Recessed Soap Dish Recessed Square Post Toilet Paper Folded Toilet Tissue
Rear Mounting Toilet Paper Holder Holder Holder
Rear Mounting Front Mounting Front Mounting
Type 304 16 gauge satin finish Type 304 14 gauge stainless steel Type 304 18 gauge satin Satin finish type 304
stainless steel (1.7 mm). One-piece (2.1 mm). Exterior satin finish, interior finish stainless steel (1.2 14gauge (2.1 mm) stainless
drawn construction with beveled glass-blasted satin finish. Interior mm), 1 ⁄ 4" O.D. (32 mm). steel. Open design for
1
trim and embossments for air depth 4 ⁄ 2" (115 mm) holds one R-3 flange is 3" diameter, detection of contraband.
1
circulation and drainage. standard toilet paper roll. Hidden 1 ⁄ 8" thick with three Provided with 4 mounting
Two “T” nuts welded on back contraband causes roll to project countersunk holes for front holes for front mounting.
for rear mounting. from holder, allowing detection. mounting (76 x 3 mm).
Two “T” nuts welded on back for 3
1
Wall Opening: rear mounting. Overall Size: 4 ⁄ 2" x 3 ⁄ 4" Overall Size: 4 ⁄ 4” x 9”x
3
6 ⁄ 2" x 5" wall thickness projection (115 x 95 mm) 2 ⁄ 4” (120 x 230 x 70 mm)
3
1
1
(165 x 130 mm) 869-A Wall Opening: 5 ⁄ 2" diameter
Overall Size: (140 mm) x wall thickness.
3
7 ⁄ 8" x 6" (187 x 152mm) Overall Size: 7" x 7" (179 x 179mm)

Not Shown:
36 without square flange.
869-C - Same as 869-A
Wall Opening: 6" (152mm) diameter.

Tubular SpecialTieS Mfg. 800/GrabBar (800/472-2227) • Fax: 310/217-0653