Page 31 - Tubular Specialties Manufacturing, Inc. - Catalog 825

Built-In Stainless Steel Corner Guards Provide wing size and length. Type 430 satin finish stainless steel
in 18 gauge is standard; 16 and 14 gauge are available.

CP-H Series CP-Z1 Series CP-Z2 Series
Hemmed Edge Corner Guard Z-Bend Corner Guard with Anchors Z-Bend Corner Guard with Screws
The rounded return edges of the CP-H corner The Z bends provide a flush mounting when Same as Z1, except Z2 includes stainless
guard provide flush mounting when installed installed with plaster, dry wall or ceramic tile steel screws in lieu of anchors.
on concrete block on metal studs, wood
or brick wall with studs, concrete block
ceramic tile or dry walls or brick walls.
wall. Includes steel CP-Z1 includes steel
anchors for anchors for
embedding in embedding in
masonry joints masonry joints
with grout. with grout.

Lexan Corner Guards

For maximum protection of corners subject to heavy abuse, TSM recommends stainless steel Corner Guards & door Frame savers
corner guards. However, for indoor use and light vehicle traffic, Lexan corner guards are an
attractive alternate as they are available in clear and a variety of colors. Wall covering or paint
is visible through clear corner guards, making them ideal for hotel and residential applications.
Installation options are either screws or double-backed tape. Clear with screws are carried in stock.
Custom lengths are available.
Available in Clear (standard), White, Almond, Dark Almond,
Gray and Black.

Clear Lexan Model Numbers Colored Lexan Model Numbers
Length Length
Wings 48” (1219mm) 96” (2438mm) Wings 48” (1219mm) 96” (2438mm)
1 ⁄ 8" x 1 ⁄ 8" Screws CP-11848L CP-11896L 1 ⁄ 8" x 1 ⁄ 8" Screws CP-11848LC CP-11896LC
1
1
1
1
2 ⁄ 2" x 2 ⁄ 2" Screws CP-2548L CP-2596L 2 ⁄ 2" x 2 ⁄ 2" Screws CP-2548LC CP-2596LC
1
1
1
1
1 ⁄ 8" x 1 ⁄ 8" Tape CP-11848LT CP-11896L 1 ⁄ 8" x 1 ⁄ 8" Tape CP-11848LTC CP-11896LC
1
1
1
1
1 ⁄ 8" x 1 ⁄ 8" Tape CP-11848LT CP-11896L 1 ⁄ 8" x 1 ⁄ 8" Tape CP-11848LTC CP-11896LC
1
1
1
1
Door Frame Savers & Kickplates Anti-Slip Coating
Door Frame Saver Kickplate 20102 Anti-Slip Coating
Protects door frames from WS-430K – Type 430 Stainless Steel - Interior Use Two-part formula provides a
wheeled vehicles such as WS-304K – Type 304 Stainless Steel - Interior and Exterior Use superior slip-resistant surface for
gurneys and food carts. Satin finish 18 gauge x 8", 10" & 12" wide. grab bars. Can be brushed or
Center section of unit Standard lengths 22", 28", 30", 34", 35", 40" & 46"; rolled on and dries translucent.
swivels to deflect force of custom lengths available. Holes drilled 6" on center (152mm). May be applied over satin and
object. Type 304 satin bright stainless steel as well as
powdercoated and plated finishes.
finish stainless steel. Not Shown: Container is .9 pint.
WS-BBK - Interior Use
Bright brass 20 gauge with lacquered finish. Same sizes as above.
DS-724 - Wood Frame, 24”
DS-724 - Wood Frame, 36”
DS-724-HM - Hollow Metal, 24” 31
DS-724-HM - Hollow Metal, 36”
Tubular SpecialTieS Mfg. 800/Grab Bar (800/472-2227) • Fax: 310/217-0653