Page 23 - Tubular Specialties Manufacturing, Inc. - Catalog 825

Fasteners

BB-3 OH2, PH2 OHMSOW
Back-to-Back Mounting Plate Screw Mounting Kits One-Way Machine Screw Kits
Mounts two bars back-to-back on 2” #10 Stainless Steel Sheet Metal Screws. Oval head for use with in-wall backplates. Fasteners
3
1
partitions from /4” to 1 /2”. Three screws per kit; order one kit per flange. Tamper-resistant. Three screws per kit;
Order one for two flanges. order one kit per flange.
PH2 - Pan Head for 14 gauge flanges:
R-1, CS-1, CS-15, FS-1, D-1 OHMSOW2 - 2” x #10
OH2 - Oval Head for 8 gauge flanges: OHMSOW1/2 - /2” x #10
1
R-3, CS-3, CS-35, D-3
Shown with D-3

BP-2
Partition Back Plate
3
Accommodates panel thicknesses from /4”
1
to 1 /2”. Order one per flange. OHOW
OH2-EX2, PH2-EX2
Screw & Expandet Anchor Kits One-Way Sheet Metal Screw Kits
2” Sheet Metal Screws with plastic expandet Oval head for use with 8 gauge flanges.
anchor. Each kit has three screws and three Tamper-resistant. Three screws per kit;
Shown with CS-1 expandet anchors. Order one kit per flange. order one kit per flange.
PH2-EX2 - Pan Head for 14 gauge flanges: OHOW2 - 2” x #10
R-1, CS-1, CS-15, FS-1, D-1 OHOW3/4 - /4” x #10
3
BP-10A OH2-EX2 - Oval Head for 8 gauge flanges:
Anchor Plate without Hole Pattern R-3, CS-3, CS-35, D-3
Weld plate to building studs or fasten with bolts
and nuts. Drill and tap holes in plate through
finish wall. Fasten product to metal plate with
machine screws provided. SP-4
Sub Plate
In addition to their use with through bolts,
SP-4's can be used to install center
Shown with 801 supports with triangular hole formations
Shown with 875-C 24” when access is tight and to bolt to a stud
so that all three screw holes are engaged.
Order one per flange.
SP-4X - For exposed screw flanges:
BP-10B OH3-TOG, PH3-TOG R-1, R-3, D-1, D-3
Anchor Plate with Hole Pattern Toggle Bolt Kits SP-4C - For concealed screw flanges:
Specify flange model so the threaded sleeves 3 /16” dia. x 3” length stainless steel toggle bolt CS-1, CS-15, CS-3, CS-35, FS-1
match mounting holes. Attach product to BP-10B (wings not stainless). Each kit has three bolts
and fasten plate to building studs, allowing for and three wings. Order one kit per flange.
recommended mounting heights. Remove
product. Insert marker screws (not provided by PH3-TOG - Pan Head for 14 gauge flanges:
TSM) through wood spacers into plate. Press R-1, CS-1, CS-15, FS-1, D-1
drywall in place against the marker screws and drill OH3-TOG - Oval Head for 8 gauge flange
through indentations. When drywall is installed, R-3, CS-3, CS-35, D-3 TB-6, TB-8
marker screws will project through wall. Remove Through Bolt
and discard them, then fasten product to BP-10B Rod inserts through partition and into
with machine screws provided.
an SP-4 sub-plate (order separately).
Requires only one hole drilled through
12” a partition. Order one per flange.
1
TB-6 - 1 /2” Rod
TB-8 - 8” Rod
24”
For bars over 36”
for attachment of
single flange. Shown with 5230

23

36”, 48” TB-6 with SP-4C
Shown with 711

Tubular SpecialTieS Mfg. 800/Grab Bar (800/472-2227) • Fax: 310/217-0653